Ibis HD6 XT Di2 Alloy

The HD6 is the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.

Geometry
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle, a BB height similar to Mojo HD5, and a 435mm chainstay length, the bike maintains an equilibrium between agility and stability.

Five Sizes
In order to place every size rider in the same position over the rear wheel, the HD’s seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.

Coil Compatible
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.

DW-Link
The suspension layout may be new, but it’s still DW-Link. The inherent efficiency means you don’t need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.

Traction Tune
Our cus­tom tuned front and rear sus­pen­sion fea­ture extra light, high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through rough ter­rain like a tro­phy truck storm­ing through a set of whoops.

Bushings
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strong­ly in them, we back them with free life­time replacement.

Internal Cable Routing
Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out - a beau­ti­ful moment indeed.

PROTECT YOUR INVESTMENT
A thick rub­ber down­tube pro­tec­tor deflects debris, while our chain­stay pro­tec­tor fea­tures thick raised sec­tions to help damp­en chain slap noise. And our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

Lifetime Warranty
If it's our fault, we'll fix it. Simple as that.

*Specs may vary from image displayed*